Drivers test hand position

 · In driver’s education of the past, instructors taught students proper hand placement on the steering wheel to be at the “10 and 2” position, alluding to the hands of a clock. However, due to airbags and advancements in steering technology, “10 and 2” is no longer the recommended steering position.  · Before making a right turn or changing lanes from left to right, rest your left arm on the window sill and point your hand up with your palm facing forward. Try to make your arm easily visible to other drivers while being in a safe and comfortable driving position. Slow Down or Stop Hand Signal: How Do I Perform It?/5(44).  · NHTSA now recommends the technique known as "9 and 3". Place your left hand on the left portion of the steering wheel in a location approximate to where the nine would be if the wheel was a clock. Your right hand should be placed on the right portion of the wheel where the three would be located/5().

The 10 and 2 position – the traditional steering wheel hand position, which affords good leverage and comfort. The 9 and 3 position – this position is slightly less comfortable than “10 and 2” but is safer, as it keeps the driver’s forearms away from the airbag deployment zone. Hand position on steering wheel. Lower your hands. You probably learned to keep your hands at the 10 and 2 o'clock positions on the steering wheel. Today, the National Highway Traffic Safety Administration (NHTSA) recommends drivers put their hands at the 9 and 3 o'clock positions. One reason for the change is to potentially keep hands out of the way if the airbag deploys. get pass road test checklist: For the purposes of a road test you must keep both hands on the steering wheel for the duration of the drive. Watch the video!.

A AP During the test, you should keep both hands at the 8 and 4 o'clock position on the wheel. When making left or right turns, the best method. It is, however, best practice to position your hands in the 10 to 2 position throughout your test, while using the push and pull technique. This is the. Hold the wheel at the 10 to 2, or the quarter to 3 position with a light grip and use the push-pull method of steering. That is, not passing or crossing your.